model T single flow tube PTFE meters
Designed for low flowrates, the model T flowmeter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical variable area meter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow and level indicating, etc. 150 mm Meter with CV™ Valve. Shipped completely assembled, flowmeters include standard mounting fittings in a choice of materials, side plates, thick protective magnifying front shield and back plate, optional built-in control valve, and flowtubes selected from the Flow Capacities tables. Panel mounting style is convertible to bench mounting through the use of the optional acrylic tripod. The tripod has a built-in spirit leveler and leveling screws.
Flow tubes for these meters are available with two types of scales, suitable for different types of applications
DIRECT READING SCALESDirect reading scales are indicating flow rates of liquids and gases,in engineering units such as [mL/min], standard cubic feet per hour [scfh] etc. Such scales are designed exclusively for a specific gas or liquid at a given set of pressure and temperature parameters, and are valid for the associated units of flow only. The convenience of direct reading scale designs should be weighed against the resultant limitations of applicability. Generally, direct reading scales are most suited to OEM applications.
UNIVERSAL MILLIMETER (CORRELATED) SCALESMillimeter scales indicate the vertical position of the spherical float within the metering tube as the flow increases or decreases.
It is necessary to use flow tables or graphs supplied, to correlate float referenced readings with actual volumetric flow rates.
The advantage of Universal type scales is the ability to utilize the use of a given flow meter for a great number of different fluids at diverse pressure and temperature conditions, generally preferred in applications in laboratories, etc.
BUILT-IN VALVESMeters are available with built-in needle valves (CVT™ ), high precision metering valves (HRT™) with “non-rising stems”, or with no valves. The higher cost of HRT™ valves is justified whenever high sensitivity control and resolution are desirable particularly in conjunction with metering tubes of very low flowrates.
When meters with valves are ordered the valve cartridges are installed at the inlet. For vacuum service it is recommended that meters are ordered with valves at the outlet.
SPECIFICATIONS |
STANDARD ACCURACY ±2% FS (mm scales - except 032/042 flow tubes); ±5% FS (direct reading scales and 032/042 flow tubes) |
CALIBRATED ACCURACY ±1% FS |
REPEATABILITY ±0.25% FS |
USEFUL FLOW RANGE 10:1 minimum with one float |
MAXIMUM OPERATING PRESSURE 100 psig (6.7 bars) |
MAXIMUM OPERATING TEMPERATURE 150°F (65°C) |
LEAK INTEGRITY individually pressure and leak tested and certified to a rating of 1x10-7 sccs helium |
MATERIALS OF CONSTRUCTION |
FLOW TUBES heavy walled borosilicate glass (glass or sapphire floats recommended) |
FITTINGS IN CONTACT WITH FLUIDS virgin PTFE and PCTFE |
SIDE PANELS aluminum, black anodized |
FRONT SHIELD Lexan® with longitudinal magnifier lens for enhanced reading resolution |
BACK PLATE 1/8 inch thick white acrylics |
O-RINGS PTFE |
CONNECTIONS 1/8 inch NPT female inlet and outlet connections; optional glass hose nipples or compression fittings are available |
T / Tx meter literature model T (single flow tube) and Tx (multi flow tube) - PTFE rotameter catalog page(s)
Technical Information (Rotameter)
- Valve Flow Capacities
- Metering Sizing
- Calculation vs Calibration
- Table of Standard Flow Capacities
- Table of Direct Reading Scales
- Common Equivalents and Conversions
Rotameter Catalog Full line Rotameter and Valves Catalog
Digital and Analog Flow Meters Catalog Full line Digital and Analog Flow Meters, Controllers, Valves and Accessories Catalog